Electrical Incinerator

Electrical Incinerator

CECON’s range of Incinerators offers you the complete solution to your waste management problem from hospitals to industrial units, CECON is the preferred choice for any type of waste management problem.

CECON INCINERATOR works on the principle of thermal destruction i.e. conversion of waste into ash by incineration at controlled temperatures. Our eco-friendly incinerators ensure total incineration with no unburnt residue and meet the emission standards laid down by the Pollution Control Board.

CECON's unique Digital Control Panel with Digital Temperature Indicator & Controller ensures that electrical supply is automatically cut off on achieving the required temperature inside the Incineration Chamber, thus helping you save on electricity consumption.

Robust Construction
CECON INCINERATORS are constructed with Mild Steel and the body is reinforced with M.S. Angle. The body is painted with heat resistant paint. Incineration Chamber is insulated with high quality ceramic and rock wool blankets and refractory is made up of high grade Alumina and insulating bricks.

The Incinerator comprises of two chambers, with heating at Primary Chamber 800^oC±50^oC for burning waste and Secondary Chamber 1050^oC±50^oC for exhaust gas combustion.

Customized – available in all sizes with accessories, starting from 5 Kg.
Convenient – Easy to install, easy to maintain and easy to use
Safe – for the operator and for the environment
Sturdy – built with MS Steel & well insulated Dual Chamber Construction
Efficient – 99% Combustion efficiency
Fuel Efficient – Economizes use of fuel and leaves no unburnt residue
Trouble Free Performance
All types of Pollution Control accessories available
Quick disposal of hazardous hospital waste
Protect environment & fight pollution by total Incineration
Eradicate Infection and contamination spreading source
Maintain clean & healthy pollution free surroundings of your Hospitals.

CECON Electrical Incinerators are available for :

Bio Medical Waste Disposal
Paper Waste Disposal
General/Municipal Waste Disposal

Front Loading Type
A solid and sturdy unit having continuous front loading system. The Incineration chamber is made of Stainless Steel with ASH disposal from the bottom through ash scrapper. The heating in this Incinerator is done through Heating Elements of Kenthal A1/Nicrome Grade which are designed to work on low watt density thus ensuring long life of heating elements. The system is attachable to all types of Pollution Control Accessories.

Available in capacities ranging from 5kg/hr to 500kg/hr. Suitable for wet/semi-wet and dry waste generating from Hospitals, Blood Banks, Pathology Clinics, Nursing Homes, Hotels and Industries.

Emission Norms
We certify that the emission discharge from CECON INCINERATORS shall be within specified limits as prescribed by Central Pollution Control Board & State Pollution Control Board.

Accessories

Chimney

The chimney is provided with Strong M.S. Base with Inspection Window and inbuilt ladder. Sampling port with sampling platform alongwith optional attachments of Aviation light, Lightning Arrestor and Earthing Strip. The Chimney is connected through centrifugal air blower for effective removal of emission from the entire system.

Venturi / Water Scrubber

For removing impurities from the emission and waste out ash contents from the discharged air through chimney. The scrubbing is generally through water but caustic lime solution scrubbing can also be provided to neutralize any gas or acid formation.

Foul Odour Treatment Unit

This system can effectively remove foul smell if any, generated through Bio-Medical Waste, Industrial Waste, Zoo Waste & General waste etc. This system is provided with impregnated activated charcoal filter for removing any kind of foul smell before releases through chimney.

Cyclone Dust Collector

This system is provided to remove any solid partial from the discharged emission air. This system form a cyclonic condition and removes the particles which are collected in a tray provided with the equipment.

Droplet Separator

This unit is provided to remove any moisture contents from the discharged emission air. This unit is attached after the water scrubber, so that the emission discharge through chimney is free from any moisture contents.

Ducting

Internally insulated Strong flange connected with gasket is provided for inter connections of Incinerator to various pollution control accessories.

Following are the optional attachments which can be provided with CECON Incinerator :

Conveyor Belt Arrangement

PLC Systems for operation

Counter Weight movement of waste charging door

Hospital waste
Industrial garbage
Waste oil sludges
Municipal waste
House hold / Hotel’s garbage
Infectious waste
Security documents
Chemical waste
Radioactive waste
Cytotoxic waste
Dead Bodies / Animal Carcases

Model	Capacity	Power Rating*	Type
CTL - 5F	5 Kg/hr.	5 KW	Electrical
CTL - 10F	10 Kg/hr.	5.0 - 7.5 KW	Electrical
CTL - 15F	15 Kg/hr.	10.0 - 12.5 KW	Electrical
CTL - 20F	20 Kg/hr.	15.0 - 17.5 KW	Electrical
CTL - 25F	25 Kg/hr.	20.0 - 22.5 KW	Electrical
CTL - 30F	30 Kg/hr.	25.0 - 30.0 KW	Electrical
CTL - 40F	40 Kg/hr.	30.0 - 35.0 KW	Electrical
CTL - 50F	50 Kg/hr.	45.0 - 50.0 KW	Electrical
CTL - 75F	75 Kg/hr.	50.0 - 55.0 KW	Electrical
CTL - 75F	75 Kg/hr.	60.0 - 70.0 KW	Electrical
* Power rating of the heating element. Approximate values only.

Temperature :
Primary Chamber : 800^oC±50^oC
Secondary Chamber : 1050^oC±50^oC

Higher Capacities are also avaliable on request.

Related Products

CECON POLLUTECH PVT. LTD.

QUICK LINKS

SOCIAL NETWORK